|
|
TM 9-2320-269-34-1
FORWARD CLUTCH AND TURBINE SHAFT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY
1.
Forward clutch
Bearing race (2) and
Take off.
housing and
roller bearing
shaft (1)
assembly (3)
2.
Power takeoff
a.
Using 3/16-inch flat-tip screwdriver,
gear (4) and
at the cutout nearest snapring gap,
snapring (5)
press snapring (5) into its groove.
b.
Slip a piece of shim stock between
snapring (5) and inner splines of power
takeoff gear.
c.
Repeat above action 1800 from snap-
ring gap.
d.
Repeat action at every cutout, approxi-
mately every 3 inches (76 mm).
e.
Push gear (4) from clutch housing.
If gear binds, look for area of Inter.
ference and press snaprlng there.
3.
Snapring (5)
a. Using snapring pliers take off.
b. Take off shim stock.
4.
Fourth clutch
Snapring (7)
Using 114-inch flat-tip screwdriver, take
driving hub (6)
out.
5.
Forward clutch
Fourth clutch
Take out.
hub (8)
driving hub (6)
6.
Forward clutch hous-
Forward clutch
Take out.
ing and shaft (1)
hub (8)
7.
Bearing race (9),
Take out.
roller bearing
assembly (10), and
bearing race (11)
2-738
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |