|
|
TM 9-2320-269-34-1
TRANSMISSION CONTROL VALVE ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY - CONTINUED
36. Control valve
Fourth clutch trim-
Put in bore.
body (1)
mer valve (2), plug
(3), outer spring
(4), inner spring
(5), and stop (6)
37.
Second clutch trim-
Put in bore.
mer valve (7), plug
(8), outer spring
(9), inner spring
(10), and stop (11)
38.
First clutch trim-
Put in bore.
mer valve (12), plug
(13), outer spring
(14), inner spring
(15), and stop (16)
39.
Third clutch trim-
Put in bore.
mer valve (17), plug
(18), outer spring
(19), inner spring
(20), and stop (21)
40.
Trimmer valve
a. Place in position.
cover (22)
b. Press and hold in place against spring
pressure.
41. Trimmer valve
Eight screws (23)
a. Put in position.
cover (22)
b. Screw in until snug using 7116-inch
socket and ratchet handle with 1/2-inch
drive.
c. Using 7/16-inch socket and torque
wrench with 1/2-inch drive, tighten
to 9-11 ft-lb (12-15 N m) of torque.
42. Control valve
Plunger (24), spring
Put in bore.
body (1)
(25), and stop (26)
43.
Retainer pin (27)
a. Press on stop (26).
b. Place in position.
c. Using long round-nose pliers, put in.
2-722
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |