DISASSEMBLY - CONTINUED - TM-9-2320-269-34-10631

TM 9-2320-269-34-1

RELAY BOX - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

DISASSEMBLY - CONTINUED

Top relay (1)

White ground

Using soldering gun, unsolder and take

and center right

wire (3)

off.

terminal (2)

Two nuts (6),

a. Using 3/8-inch box-end wrench,

and center

unscrew and take off.

solenoid (5)

and white ground

b. Get rid of lockwashers (7).

wires (8)

Relay box (9)

Three wire clamps

a. Using 1/2-inch cold hand chisel and

(10) and nuts (11)

ball-peen hammer, drive nuts (11)

counterclockwise to loosen.

Unscrew and take out.

CLEANING

WARNING

Solvent burns easily. Solvent fumes are explosive. Do not smoke or allow open flame nearby when

using solvent. Failure to observe these precautions could cause serious injury or death.

CAUTION

Do not immerse solenoids or relays in drycleaning solvent. Solvent will dissolve the insulation on

coils.

TA238355

TA238355