|
|
TM 9-2320-269-34-1
CONSOLE TACHOMETER AND OUTRIGGER HYDRAULIC SOLENOID WIRING HARNESS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
83
Outrigger lockout
Wire (3), washer
a. Route harness under engine compart-
switch (1) and
(4) and screw (5)
ment and cab toward back of vehicle.
terminal (2)
b. Take off tag.
c.
Pull through to switch (1).
d.
Screw in, and tighten using 3/16-inch
flat-tip screwdriver.
84.
Terminal (6)
Wire (7), washer
Screw in, and tighten using 3/16-inch
(8), and screw (9)
flat-tip screwdriver.
85
Terminal (10)
Washer (11) and
Screw in, and tighten using 3/16-inch
screw (12)
flat-tip screwdriver.
86
Outrigger lockout
Cap (13)
Screw on, and tighten.
switch (1)
87
New gasket (14) and
Put in place.
cover (15)
88
Cover (15)
Two screws (16) and
a. Screw in, and tighten using 3/16-inch
(17)
flat-tip screwdriver.
b.
Repeat steps 83 thru 88 for all lock-
out switches.
TA238331
2-588
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |