 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-269-34-1
CONSOLE TACHOMETER AND OUTRIGGER HYDRAULIC SOLENOID WIRING HARNESS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
17. Terminal (1)
Screw (2) and
Using 3/16-inch flat-tip screwdriver,
washer (3)
unscrew and take off.
18. Outrigger warning
Wire (5)
Pull through, and tag for installation.
switch (4)
19. Terminal (6)
Screw (7) and
Using 3/16-inch flat-tip screwdriver,
washer (8)
unscrew and take out.
20. Outrigger warning
Wire (9)
a.
Pull through, and tag for inst allation.
switch (4)
b.
Route wires (5) and (9) down through
guide rings under truck.
c.
Using diagonal cutting pliers, cut tie
wraps as you find them, as you route
wires.
d.
Using pocket knife, cut electrical tape
as you find it, as you route wires.
e.
Get rid of wraps and/or tape.
NOTE
Steps 21 thru 28 cover right rear outrigger lockout switch. Repeat steps for all outrigger lockout switches.
21. Cover (10)
Two screws (11)
Using 3116-inch flat-tip screwdriver,
and (12)
unscrew and take out.
22. Outrigger lockout
Cover (10) and
a.
Take off.
switch (13)
gasket (14)
b.
Get rid of gasket (14).
TA238320
2-576
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals