CLEANING - TM-9-2320-269-34-10523

TM 9-2320-269-34-1

24-VOLT CONVERTER SYSTEM WIRING HARNESS - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

CLEANING

NOTE

For more information on how to clean parts, go to General Maintenance Instructions (page 2-46).

WARNING

Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame nearby when using

solvent. Failure to observe these precautions could cause serious injury or death.

Terminals (1)

Clean with clean rag dampened with dry-

cleaning solvent.

24-volt wiring

Wipe clean with damp rag, and using clean,

harness (2)

dry rag, wipe dry.

INSPECTION/REPLACEMENT

NOTE

For more information on how to inspect parts, go to General Maintenance Instructions (page 2-46).

Replace damaged or defective parts as needed.

24-volt wiring

a. Look for cut, burned, and worn

harness (2)

insulation.

b. Look for broken wires, and replace as

necessary.

c. Look for broken and corroded receptacle

and terminals.

INSTALLATION

21.

Vehicle (3)

24-volt harness (2)

Route harness through receptacle hole to

left frame and forward to cab.

2-506