|
|
TM 9-2320-269-34-1
STARTING MOTOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY - CONTINUED
154.
Drive housing (1)
New packing (2)
Put In place.
155.
Lever housing (3)
Note scribe marks, and put in position.
156.
Five screws (4) and
a.
Using 7/32-inch key bit, 3-inch exten-
screw (5)
sion, and ratchet handle with 3/8-inch
drive, screw in and tighten.
b.
Tighten to 156 in-lb (18 N m) of torque
using 7/32-inch key bit, 3-inch exten-
sion, and torque wrench with 3/8-inch
drive.
157.
End plate (6),
Three plugs (7)
a.
Using 3/16-inch socket-
head screw
drive housing (1),
key, unscrew and take out.
and lever housing (3)
b.
Apply oil to felt.
c.
Screw in, and tighten using 3/16-inch
socket-head screw key.
158.
Lever housing (3)
Plug (8) and Using 15/16-inch screwdriver bit and
gasket (9)
ratchet handle with 1/2-inch drive,
unscrew and take out.
2-458
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |