|
|
TM 9-2320-269-34-1
RIGHT WATER OUTLET - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Wire clip
Screw (2), nut (3),
Using 7/16-inch socket, ratchet handle
bracket (1)
and wire clip (4)
with 3/8-inch drive, and 7/16-inch
open-end wrench, unscrew and take off.
2. Right water
Two screws (6),
a. Using 9/16-inch socket and ratchet
outlet (5)
lockwashers (7),
handle with 3/8-inch drive, unscrew
wire clip bracket
and take off.
(1) and oil level
b. Get rid of lockwashers (7).
gage assembly (8)
Right water
a. Take off.
cover (9) and right
outlet (5) and
b. Get rid of gasket (11).
cylinder head (10)
and gasket (11)
4. Right water outlet
Nut (13) and
Using 7/16-inch open-end wrench,
(5) and sending
wire lead (14)
unscrew and take off.
unit (12)
DISASSEMBLY
5. Right water
Water pipe (15) and
a.
Put outlet (5) in vise.
outlet (5)
two packings (16)
b.
Slide out.
c.
Take off packings (16).
d.
Get rid of packings (16).
6.
Sending unit (12)
Using 314-inch open-end wrench, unscrew
and take out.
7.
Pipe plug (17)
a. Using 9/16-inch open-end wrench,
unscrew and take out.
b. Take outlet (5) out of vise.
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-46).
2-396
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |