|
|
TM 9-2320-269-34-1
ETHER STARTING AID - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY - CONTINUED
20.
Fuel valve (1)
Cap (2) and
a. Using long round-nose pliers, unscrew
packing (3)
and take out.
b. Get rid of packing (3).
21.
Release valve
Take out.
rod (4)
22.
Spring (5) and
Take out.
washer (6)
23.
Nut (7) and
Using 3/4-inch open-end wrench, un-
washer (8)
screw and take out.
24.
Nut (7)
Two packings (9)
a. Using 1/8-inch flat-tip screwdriver,
take out.
b. Get rid of.
25.
Release valve
Clip (10)
Using long round-nose pliers, take off.
rod (4)
26.
Two packings (11)
a. Using pocket knife, take off.
b. Get rid of.
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-46).
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame nearby when using
solvent. Failure to observe these precautions could cause serious Injury or death.
27.
All parts
a. Clean in drycleaning solvent.
b. Wipe dry with clean, dry rags.
2-378
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |