|
|
TM 9-2320-269-34-1
ETHER START CONTROL CABLE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
15.
Control cable (1)
Nut (2)
Screw on, and tighten using ball-peen
hammer and cold hand chisel.
16.
Control knob (3)
Put on.
17.
Control knob (3)
Setscrew (4)
Screw in, and tighten using 5/64-inch
socket head screw key.
18.
Control cable (1)
Control knob (3)
Push in all the way.
19 .
Firewall (5)
Control cable (1)
Put through.
20.
Fuel valve (6)
Control cable (1)
a. Put cable (1) in.
and screw (7)
b. Screw in screw (7) part way.
21.
Control cable (1)
Cable stop (8)
Put on.
22.
Cable stop (8)
Screw (9)
Screw in, and tighten using 7/16-inch
open-end wrench and 1/4-inch flat-tip
screwdriver.
23.
Fuel valve (6)
Control cable (1)
a. Pull cable (1) up until lever (10)
and screw (7)
touches rod (11).
b. Tighten screw (7) using 1/4-inch flat-
screwdriver.
TA238157
2-372
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |