|
|
TM 9-2320-269-34-1
GOVERNOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY - CONTINUED
28.
Fuel injection
Governor
Take off.
pump (1)
bracket (2)
29
Screw (3) and
Using 5/16-inch flat-tip screwdriver,
washer (4)
unscrew and take out.
30
Six screws (5),
a. Using 3/8-inch flat-tip screwdriver,
governor housing
bit with 1/2-inch drive, 3-inch extens-,
(6), and gasket (7)
ion and hinged-handle with 1/2-inch
drive, unscrew and take out screws (5).
b. Take off housing (6), tapping with
plastic-hammer.
c. Take off and get rid of gasket (7).
31.
Control rack (8)
Spring seat (9),
a. Hold spring seat (9) down.
bracket bolt (10),
b. Take out bolt (10).
governor spring
c. Let seat (9) up, and take off spring
(11) and spring
(11) and ring (12).
ring (12)
32.
Governor shaft (13)
Governor lever (14)
Using 114-inch flat-tip screwdriver,
take off.
33.
Pin (15)
Cotter pin (16)
Using diagonal cutting pliers, take out
and get rid of.
TA238131
2-340
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |