|
|
TM 9-2320-269-34-1
GOVERNOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY - CONTINUED
16
Governor link (1)
Governor lever (2)
Pull out and down.
17
Adjusting pin (3)
Governor lever (2)
Take out.
and guide (4)
18.
Governor bolt (5)
Retaining washer (6)
a. Using 1/8-inch flat-tip screwdriver,
and two nuts (7)
bend lockwasher (6) flat.
b. Using two 10-mm open-end wrenches,
unscrew and take off.
c. Get rid of.
19.
Flyweight (8)
Governor bolt (5)
a. Turn flyweight (8) so bolt (5) is up
and washer (9)
and down, and take out.
b. Get rid of.
20
Adjusting pin (3)
Take out.
21.
Governor
Two lockplates (11)
a Using 1/8-inch flat-tip screwdriver
bushing (10)
and screws (12)
bend lockplates (11) flat.
b. Using 10-mm open-end wrench,
unscrew and take out.
c. Get rid of lockplates (11).
TA238129
2-338
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |