|
|
TM 9-2320-269-34-1
FUEL INJECTION PUMP - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
162.
Front crankcase
Pulley (3) and
Rotate engine until pulley (3) shows top
cover (1) and
marked tang (4)
dead center and tang (4) is straight up.
drive hub (2)
163.
Fuel injection
Camshaft (6) and
a. Check static timing
pump (5)
coupling tangs (7)
(TM 9-4910-387-14).
b. Rotate camshaft (6) until tangs (7) are
straight across, and camshaft mark is
at 10-o'clock position.
164
Drive hub (2)
Drive disc (8)
Put on.
165
Drive hub (2) and
Fuel injection
Aline pump (5), and put on.
crankcase cover (9)
pump (5)
166.
Fuel injection
Two new lockwashers
Screw in, and tighten using 9/16-inch
pump (5)
(10), washers (11),
hinged socket and ratchet handle with
and screws (12)
3/8-inch drive.
167
Two new lockwashers
Screw in, and tighten using 9/16-inch
(13), washers (14),
hinged socket, 16-inch extension, and
and screws (15)
ratchet handle with 3/8-inch drive.
TA238109
2-312
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |