 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-269-34-1
FUEL INJECTION PUMP - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY - CONTINUED
101. Fuel injection
Bleeder bushing (2)
a.
Coat threads with sealing compound.
pump (1)
b.
Screw in and tighten using 11-mm
open-end wrench.
102.
New gasket (3) and
Screw In and tighten to - 25 ft-lb
overflow valve (4)
(24.4 - 33.9 N m) using 22-mm deep well
socket and torque wrench with 3/8-inch
drive.
103. Pump fitting (5)
Elbow (6)
a.
Coat threads with sealing compound.
b.
Screw in and tighten using 5/8-inch
and 19-mm open-end wrenches.
104. Oil inlet
Elbow (8)
a.
Coat threads with sealing compound.
bushing (7)
b.
Screw in and tighten using 1/2-inch
and 19-inch open-end wreenches.
105. Overflow valve (4)
Relief valve (9),
Put in.
springs (10), 'b
two shims (11),
and washer (12)
106.
New gasket (13) and
Screw in and tighten using 19-mm and
bypass outlet (14)
22-mm open-end wrenches.
107. Bypass outlet (14)
Elbow (15)
Screw in and tighten using 11/16-inch
and 19-mm open-end wrenches.
2-298
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals