|
|
TM 9-2320-269-34-1
FUEL INJECTION PUMP - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY - CONTINUED
38. Fuel injection
Eight lifter
a.
Using drive flange holding wrench, turn
pump (1)
sleeves (13)
camshaft (14) to raise one sleeve (13).
b.
Put in tappet holder.
c.
Repeat for remaining sleeves (13).
CAUTION
Many of the screws used in the fuel injection pump are torqued or held with sealing compound. Be careful not to
damage them when removing.
39. Camshaft (14)
Nut (15) and lock-
a.
Using drive flange holding wrench,
washer (16)
22-mm socket, and hinged han-
dle with 3/8-inch drive, unscrew and
take off.
b.
Get rid of lockwasher (16).
40.
Coupling (17) and
a.
Using mechanical puller, take off
woodruff key (18)
coupling (17).
b.
Take out key (18).
41. Coupling (17)
Four screws (19),
a.
Put coupling (17) in vise with soft jaws.
lockwashers (20),
b.
Using 6-mm hex key bit and hinged
and washers (21)
handle with 3/8-inch drive, unscrew
and take out.
c.
Get rid of lockwashers (20).
d.
Take couplings (17) out of vise.
TA238091
2-287
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |