|
|
TM 9-2320-269-34-1
FUEL INJECTION PUMP - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
23. Crankcase cover (1)
Fuel injection
a.
Pull free and take out.
pump (2) and
It may be necessary to tap pump with
drive disc (3)
plastic-face hammer.
b.
Set disc (3) aside.
DISASSEMBLY
24. Adapter (4)
Two nuts (6)
Using 11/16-inch open-end wrench,
and elbow (5)
unscrew and take off.
25.
Pipe (7)
Pull free and take out.
26. Three studs (8)
Three nuts (9),
a.
Using 10-mm open-end wrench,
lockwashers (10),
unscrew and take off.
and supply pump (11)
b.
Get rid of lockwashers (10).
c.
Take off pump (11).
27.
Gasket (12)
a.
Using putty knife, take off.
b.
Get rid of.
28. Supply pump (11)
Adapter (4)
a.
Put pump (11) in vise with jaw caps.
b.
Using 11/16-inch open-end wrench,
unscrew and take out.
29.
Elbow (13)
a.
Using 5/8-inch open-end wrench,
unscrew and take out.
b.
Take pump (11) out of vise.
30. Bracket (14)
Two screws (15) and
a.
Using 9/16-inch socket and ratchet
lockwashers (16)
handle with 3/8-inch drive, unscrew
and take out.
b.
Get rid of lockwashers (16).
31. Fuel injection
Bracket (14)
Take off.
pump (2)
2-284
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |