 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-269-34-1
FUEL INJECTION PUMP - CONTINUED
TM 55-1905-220-14-8
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
1.
Adapter (1)
Cable (2)
Unscrew and take out.
2.
Screw (3)
Locknut (4) and
a. Using two 3/8-inch open-end
chain (5)
wrenches, unscrew and take off.
b.
Get rid of locknut (4).
3.
Cable (6)
Screw (7) and
a. Using 1/4-inch flat-tip screwdriver,
clip (8)
unscrew and take out screw (7).
b.
Take off clip (8).
4.
Screw (9)
Nut (10)
Using 1/4-inch flat-tip screwdriver and
3/8-inch open-end wrench, unscrew
part way.
5.
Bracket (11)
Cable (6)
Take out.
6.
Screw (12)
Nut (13) and
Using two 7/16-inch open-end wrenches,
washer (14)
unscrew and take off.
7.
Governor lever(15)
Bracket (16) and
a.
Takeoff bracket (16).
screw (12)
b. Take out screw (12).
8.
Ball joint (17)
Nut (18)
Using 3/8-inch and 7116-inch open-end
wrenches, unscrew and take off.
9.
Governor lever (15)
Ball joint (17)
Take out.
and washer (19)
10.
Screw (20)
Nut (21) and
a. Using two 7/16-inch open-end
lockwasher (22)
wrenches, unscrew and take off.
b.
Get rid of lockwasher (22).
11.
Bracket (23)
Screw (20) and
Take out.
cable (24)
12.
Governor lever (15)
Two springs (25)
Take out.
13.
Clevis (26)
Cotter pin (27)
a. Using diagonal cutting pliers, take out.
b.
Get rid of.
14.
Governor lever (15)
Clevis (26)
Take out.
2-280
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals