CLEANINGIINSPECTION

TM 9-2320-269-34-1

FUEL RETURN LINES - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

CLEANINGIINSPECTION - CONTINUED

Pipe (1) and

Check for cracks, dents, and pinched

fittings (2)

areas.

Nuts (3) and (4)

Check for stripped and gouged threads.

Check for rounding off of points.

Rubber parts (5)

Check for cracks, brittleness, and wear

patterns.

INSTALLATION

NOTE

If more than one injector leak-off line is being installed, check tag marks from removal and replace

in original position.

Manifold (6)

Adapter (7)

Screw in, and tighten using 1/2-inch

open-end wrench.

Adapter (7)

Pipe (1) and

Screw on finger tight.

nut (3)

Injector (8)

Pipe (1) and

a Seat pipe (1) into injector (8).

nut (4)

b Screw in nut (4), and tighten using

1/2-inch open-end wrench.

Adapter (7)

Nut (3)

Tighten using 112-inch open-end wrench.

TA238082

2-274