INSPECTION/REPLACEMENT - TM-9-2320-269-34-10241

TM 9-2320-269-34-1

ENGINE OIL COOLER BRACKET - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

NOTE

For more Information on how to clean parts, go to General Maintenance Instructions (page 2-

46).

WARNING

Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame nearby when

using solvent. Failure to observe these precautions could cause serious injury or death.

10.

All metal parts

a. Clean in drycleaning solvent.

b. Wipe dry with clean, dry rags.

INSPECTION/REPLACEMENT

NOTE

For more information on how to inspect parts, go to General Maintenance Instructions (page 2-46).

Replace damaged parts as needed.

11.

Oil cooler

a. Look forcracks, breaks, and dents.

bracket (1)

b. Look for bent mounting flanges.

ASSEMBLY

12.

Oil cooler

Valve (2) and

Put in.

bracket (1)

spring (3)

13.

New gasket (4)

Screw in, and tighten using 1 1/8-inch

and plug (5)

open-end wrench.

14.

Elbow (6)

Using 7/16-inch open-end wrench, screw

in and tighten.

15.

Two plugs (7)

Using 7/16-inch open-end wrench, screw

in and tighten.

16.

Plug (8)

Using 9/16-inch open-end wrench, screw

in and tighten.

17.

Nut (9) and

a. Screw together, and tighten using two

elbow (10)

9/16-inch open-end wrenches.

2-224