|
|
TM 9-2320-269-34-1
ENGINE OIL COOLER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-46).
WARNING
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame nearby when using solvent.
Failure to observe these precautions could cause serious injury or death.
9.
Oil cooler
a.
Wipe clean with clean rags dampened
assembly (1)
with drycleaning solvent.
b.
Wipe dry with clean, dry rags.
10.
Elbow (2), pipe
a.
Clean in drycleaning solvent.
tee (3), and
b.
Wipe dry with clean, dry rags.
connector (4)
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-46).
Replace damaged parts as necessary.
11.
Oil cooler
Look for cracks, breaks, and dents.
assembly (1)
12.
All threaded parts
Look for stripped and gouged threads.
ASSEMBLY
13. Oil cooler
Pipe tee (3)
a.
Mount assembly (1) in vise.
assembly (1)
b.
Using pipe wrench, screw in and
tighten.
14. Pipe tee (3)
Connector (4)
Using pipe wrench and 1 1/16-inch open-
end wrench, screw on and tighten.
15. Oil cooler
Elbow (2)
a.
Using 1-inch open-end wrench, screw
assembly (1)
in and tighten.
b.
Take assembly (1) out of vise.
2-220
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |