 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-269-34-1
ENGINE OIL PAN - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Oil pan (1)
23 screws (2) and
a.
Using 1/2-inch socket, 10-inch exten-
lockwashers (3)
sion, and ratchet handle with 3/8-inch
drive, unscrew and take out.
b.
Get rid of lockwashers (3).
2.
Cylinder block (4)
Oil pan (1) and
a.
Take off.
gasket (5)
b.
Get rid of gasket (5).
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-46).
WARNING
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame nearby when using solvent.
Failure to observe these precautions could cause serious injury or death.
3.
All metal parts
a.
Clean in drycleaning solvent.
b.
Wipe dry with clean, dry rags.
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-46).
Replace defective parts as needed.
4.
Oil pan (1)
a.
Look for large dents.
b.
Look for cracks and breaks.
c.
Look for bent and cracked mounting
flanges that would affect sealing.
INSTALLATION
5.
Cylinder block (4)
New gasket (5)
Place in position.
and oil pan (1)
6.
Oil pan (1)
23 screws (2) and
Screw in, and tighten using 1/2-inch
new lockwashers (3)
socket, 10-inch extension, and handle
with 3/8-inch drive.
2-204
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals