|
|
TM 9-2320-269-34-1
CAMSHAFT BEARINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION - CONTINUED
1.
Continued
d.
Using micrometer, measure inside di-
ameter of each bearing.
Front bearing ID should be 2.346 -
2.347 inch (59.58 - 59.61 mm).
Second bearing ID should be 2.315 -
2.316 inch (58.80 - 58.83 mm).
Third bearing ID should be 2.289 -
2.290 inch (58.14 - 58.17 mm).
Rear bearing ID should be 2.246 -
2.247 inch (57.05 - 57.07 mm).
REMOVAL
2.
Camshaft cover
Three screws (8)
a.
Using 9/16-inch socket and ratchet
plate (7)
and lockwashers (9)
handle with 1/2-inch drive, unscrew and
take out.
b.
Get rid of lockwashers (9).
3.
Cylinder block (1)
Camshaft cover plate
a.
Take off.
(7) and gasket (10)
b.
Get rid of gasket (10).
TA238024
2-191
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |