|
|
TM 9-2320-269-34-1
ENGINE ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
102. Speedometer cable
Speedometer
Screw on and tighten using two 1-inch
adapter (1)
cable (2)
open-end wrenches.
103. Transmission
Cable clamp (4) with
Put in position.
assembly (3)
cable (5)
104. Cable clamp (4)
Spacer (6) and
Screw in, and tighten using 1/2-inch
screw (7)
open-end wrench.
105. Transmission
Cable (5), cable
Put in position.
assembly (3)
clamp bar (8), and
cable clamp (9)
106. Cable clamp (9)
Two screws (10) and
Screw in, and tighten using 318-inch
nuts (11)
open-end wrench and number two cross-tip
screwdriver.
107. Shift lever (12)
Nut (13)
Screw on, and tighten using 9/16-inch
socket and ratchet handle with 3/8-inch
drive.
108. Oil temperature
Two screws (15) and
a.
Check tags for proper location and take
sending unit (14)
wire (16)
off.
b.
Screw in, and tighten using 1/4-inch
flat-tip screwdriver.
2-78
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |