|
|
TM 9-2320-269-34-1
ENGINE ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
13.
Fuel return pipe
Tee-to-side member
a. Put pail underneath to catch draining
tee (1)
pipe (2)
fluid.
b. Using 5/8-inch open-end wrench, un-
screw and take off.
c. Allow fluid to drain.
d. Tag pipe(2).
e. Get rid of fluid (page 2-46).
14.
Clamp (3)
Screw (4), lock-
a. Using two 7/16-inch open-end
washer (5), and
wrenches, unscrew and take off.
nut (6)
b. Get rid of lockwasher (5).
15.
Bracket (7)
Clamp (3) and
Move away from.
wires (8)
16.
Two clamps (9)
Two screws (10)
Using 1/4-inch flat-tip screwdriver,
unscrew and loosen.
17.
Two connectors (11)
Two clamps (9),
a. Slide clamps (9) down on hoses
inlet hose (12),
(12) and (13).
and heater return
b. Twist hoses (12) and (i3) to break free
hose (13)
and take off.
c. Tag hoses (12) and (13).
TA237936
2-56
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |