APPENDIX D PACKING MATERIALS, ACCESSORIES, AND TOOLS

TM 9-1375-213-34&P

APPENDIX D

PACKING MATERIALS, ACCESSORIES, AND TOOLS

Section I. INTRODUCTION

D-1. Scope

This appendix lists packing materials, accessories, and tools required for the performance of organiza-

tional maintenance for Demolition Materials.

D-2. General

This appendix is divided into the following sections:

a. Section II - Packing Materials. A list of packing materials authorized for the performance of main-

tenance at the organizational level.

b. Section III - Special Packing Tools List. A list of special tools and accessories authorized for the

performance of maintenance at the organizational level.

D-3. Explanation of Columns

The following provides an explanation of columns in Section II and III.

a. Part Number (Drawing Number). Indicates the primary number used by the manufacturer

which controls the design and characteristics of the item. Drawings can be obtained from originating

source (see CAGE Code).

b. Commercial and Government Entity Code (CAGEC) - (Formerly known as Federal Supply Code

for Manufacturers (FSCM)). A five-digit code used to identify the manufacturer, distributor, or

Government agency/activity that supplies the item.

Figure Number. This column lists the number of the figure where the item is identified/lo-

cated.

d. Description. Indicates the federal item name and any additional description of the item

required.

D-1