 |
|||
|
|
|||
|
Page Title:
Table 4-1. Marking Information for Demolition Items - Continued |
|
||
| ||||||||||
|
|
 TM 9-1375-213-34&P
Table 4-1. Marking Information for Demolition Items - Continued
Height of
Color
Outer covering or
Marking
letters
of
body material and
Item
color
markings
None
None
Delay-Type(s) Demo-
Copper, zinc alloy,
except
lition Firing Device
olive drab.
safety
M1
strip.
FIRING DEVICE, PRESS TYPE
Zinc alloy, green,
Yellow
Pressure-Type Firing
1/8
M1A1 INERT (if inert) (LOT
white
Device M1, M1A1.
black (inert)
NO.) (DATE LOADED).
(inert).
FIRING DEVICE DEMO PULL
Zinc alloy, olive drab
Yellow
Pull-Type Demolition
1/8
Firing Device M1.
(do not repaint).
None
None
Release-Type Demoli-
Steel, galvanized or
tion Firing Device
cadmium plated.
M1
PULL-RELEASE-TYPE
FIRING DEVICE PULL RELEASE
3/16
Zinc alloy, olive drab
Yellow
DEMOLOTION FIRING
TYPE, M3.
(do not repaint).
Device M3.
(on top) FIRING DEVICE PRES-
Steel, olive drab (do
Yellow
Pressure-Release-Type
1/8
SURE RELEASE TYPE M5 (on
Demolition Firing
not repaint).
side) (LOT NO.) (DATE
Device M5.
LOADED).
FIRING DEVICE DEMO MULTI-
Yellow
Multipurpose Demoli-
Steel container, olive
1/4
PURPOSE M142 (LOT NO.)
tion Firing Device
drab Body Material
(DATE) (on metal container).
olive drab Plastic,
M142
(Do not paint) No
Markings.
FIRING DEVICE PRESSURE
Steel, light blue (old
White
Inert Firing Device
l/8
RELEASE TYPE M5 INERT
ones are black).
M5
IGNITER, BLASTING FUSE
Zinc alloy, olive drab
Yellow
Time Blasting Fuse
1/8
WEATHERPROOF M2 (INERT)
(do not repaint).
Igniter M2.
(LOT NO.) (DATE LOADED).
1
CHARGE, DEMO SHAPED 40 LB
White
Blue painted steel.
Practice Shaped
M3 PRACTICE (LOT NO.)
Charge M3.
(DATE MANUFACTURED).
(6) Plunger-type safety can.
e. Following touchup, place demolition
item in safe location in work area until paint
(7) Disposable gloves.
has dried, then transfer to next operation.
f. After removing rust or defective mark-
(8) Nonsparking wire brush.
ings, transfer item requiring complete repaint-
(9) Flammable waste can.
ing to repainting operations.
g. Materials, tools, and equipment include
Repainting
4-5.
the following:
(1) Enamel.
CAUTION
(2) Solvent,
DISPOSE OF RAGS CONTAMI-
(3) Rags.
NATED WITH PAINTS AND
SOLVENTS BY SUBMERGING IN
(4) Paint brush.
WATER IN APPROVED WASTE CAN
TO AWAIT BURNING.
(5) Work table.
4-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals