|
|
TM 9-1375-213-12-1
(d) Splice free end of reeled wire to the por-
cable to extend the firing cables. Use only
tion of firing cable still attached to rocket motor,
as much cable as necessary.
i.e., splice one conductor to the black wire and
(c) Strip three inches (7.5 cm) of insulation
splice the other conductor to the blue wire. In-
from the two conductors at the free end of the
sulate splices with electrical tape.
reel of wire.
Multi-kit hookup, widely spaced.
Figure 2-17.
2-21
Change 2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |