Figure 4-15. M1A4 priming adapter.

TM 9-1300-277

Figure 4-15. M1A4 priming adapter.

Figure 4-17. Detonating cord connector,

WARNING

ONLY USE SILVER CHLORIDE DRY

CELL BATTERIES WHICH PRODUCE

0.9 VOLTS IN THE GALVANOMETER

(TABLE 4-2). OTHER BATTERIES

MAY

PRODUCE

SUFFICIENT

VOLTAGE TO DETONATE ELECTRIC

BLASTING CAPS.

WHEN THE

GALVANOMETER IS NOT BEING

USED FOR EXTENDED PERIODS OF

Figure 4-16. M1 detonating cord clip.

TIME, THE BATTERIES SHOULD BE

REMOVED BECAUSE OF THEIR

TENDENCY TO CORRODE.

(2) M51 blasting cap test set. This test set

(fig. 4-19) was developed to replace the blasting

galvanometer for continuity testing of electrical firing

circuits. The test set is a self-contained unit with a

magneto-type impulse generator, an indicator lamp, a

handle

Change 1

4-14