 |
|||
|
|
|||
|
Page Title:
BOTTOM HOUSING ASSEMBLY AND RELATED PARTS ASSEMBLY cont'd |
|
||
| ||||||||||
|
|
 TM 9-1290-335-34&P
4-28.
BOTTOM HOUSING ASSEMBLY AND RELATED PARTS ASSEMBLY
................................................................... (CONT)
FRAME 3
Step
Procedure
1.
Push shaft (1) into sleeve bearing (2).
2.
Using grease, lubricate gears (2), (3), and (4) (JPG).
3.
Using hammer, drive pin (5) even with face of gear (3).
4.
Hold gear (3) and place one end of spring (6) into 1/8" hole of gear (3).
5.
Place drive gear (4) on spring (6).
NOTE
It may be necessary to put a 3/16" flat tip screwdriver
between the gears to position spring so that end of
spring lines up with 1/8" hole in gear (4).
6.
Press drive gear (4) and turn until spring (6) goes into 1/8" hole
of gear (4).
NOTE
When doing steps 7 and 8, one repairman must hold
gears together to prevent spring from coming part.
7.
Repairman A, holding gears, turns gear until 5/16" hole in gear (4) is lined up with pin
(5).
8.
Repairman B, not holding gears, taps pin (5) through holes on gears (3) and (4).
GO TO FRAME 4
Vol II
Para 4-28 Cont
4-40
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals