CHAPTER 2 CHECKOUT PROCEDURE - TM-9-1290-335-34-P0018

TM 9-1290-335-34&P

CHAPTER 2

CHECKOUT PROCEDURE

2-1. SCOPE

Checkout of the Mechanical Azimuth Indicator is done by using the flow chart procedures in this chapter. You must do the

checkout procedure from the beginning until a fault symptom is found. When it is, go to the fault symptom index in

Chapter 3. After you have corrected the fault, start at the beginning again and do the checkout procedure until the azimuth

indicator is working correctly.

2-2. CHECKOUT (SHEET 1 OF 10)

TEST EQUIPMENT: 0-36 VDC power supply

PERSONNEL: One

REFERENCES: JPG 41C for using power supply

EQUIPMENT CONDITION: Azimuth indicator on work bench

PRELIMINARY PROCEDURES: Do inspection upon receipt (Vol II, para 3-2)

Vol I

Para 2-1

2-1