 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 (a) The maintenance code entered in the third
Recoverability
Codes
Definition
position will indicate the lowest maintenance level
authorized to remove, replace, and use the support item.
F Reparable item.
When uneconomically
The maintenance code entered in the third position will
reparable, condemn and dispose at the direct
indicate one of the following levels of maintenance:
support level.
Code
Application/Explanation
H Reparable item.
When uneconomically
reparable, condemn and dispose at the general
C Crew or operator maintenance performed within
support level.
organizational maintenance.
D Reparable item. When beyond lower level repair
O Support item is removed, replaced, used at the
capability, return to depot. Condemnation and
organizational level.
disposal not authorized below depot level.
I
Support item is removed, replaced, used by the
L Reparable item.
Repair, condemnation, and
direct support element of integrated direct
disposal not authorized below depot/specialized
support maintenance.
repair activity level.
F Support item removed, replaced, used at the
A Item requires special handling or condemnation
direct support level.
procedures because of specific reasons (i.e.,
H Support item is removed, replaced, used at the
precious metal content, high dollar value,
general support level.
critical material or hazardous material). Refer
D Support items that are removed, replaced, used
to appropriate manuals/directives for specific
at depot, mobile depot, specialized repair
instructions.
activity only.
c. National Stock Number. Indicates the National
NOTE
Codes "I" and "F" will be considered the
stock number assigned to the item and will be used for
same by direct support units.
requisitioning purposes.
(b) The maintenance code entered in the
d. Part Number. Indicates the primary number used
fourth position indicates whether the item is to be repaired
by the manufacturer (individual, company, firm,
and identifies the lowest maintenance level with the
corporation, or Government activity), which controls the
capability to perform complete repair (i.e., all authorized
design and characteristics of the item by means of its
maintenance functions). This position will contain one of
engineering drawings, specifications standards, and
the following maintenance codes:
inspection requirements, to identify an item or range of
Code
Application/Explanation
items.
NOTE
O The lowest maintenance level capable of
When
a
stock
numbered
item
is
complete repair of the support item is the
requisitioned, the repair part received may
organizational level.
have a different part number than the part
F The lowest maintenance level capable of
being replaced.
complete repair or the support item is the direct
e. Federal Supply Code for Manufacturer (FSCM).
support level.
H The lowest maintenance level capable of
The FSCM is a 5-digit numeric code listed in SB 708-42
complete repair of the support item is the
which is used to identify the manufacturer, distributor, or
general support level.
Government agency, etc.
f. Description. Indicates the Federal item name
D The lowest maintenance level capable of
complete repair of the support item is the depot
and, if required, a minimum description to identify the
level, performed by Anniston Army Depot.
item. When the part to be used differs between serial
L Repair restricted to designated specialized repair
numbers of the same model, the effective serial numbers
activity.
are shown as the last line of the description.
g. Unit of Measure (U/M). Indicates the standard of
Z Nonreparable. No repair is authorized.
B No repair is authorized. The item may be
the basic quantity of the listed item as used in performing
reconditioned by adjusting, lubricating, etc., at
the actual maintenance function.
This measure is
the user level. No parts or special tools are
expressed by a two-character alphabetical abbreviation
procured for the maintenance of this item.
(e.g., ea, in, pr, etc.). When the unit of measure differs
(3) Recoverability code. Recoverability codes
from the unit of issue, the lowest unit of issue that will
satisfy the required units of measure will be requisitioned.
are assigned to support items to indicate the disposition
h. Quantity Incorporated in Unit. Indicates the
action on unserviceable items. The recoverability code is
entered in the fifth position of the Uniform SFR Code
quantity of the item used in the breakout shown on the
format as follows:
illustration figure, which is prepared for a functional group,
Recoverability
subfunctional group, or an assembly. A "V" appearing in
this column in lieu of a quantity indicates that no specific
Codes
Definition
quantity is applicable, (e.g., shims, spacers, etc).
Z Nonreparable item.
When unserviceable,
4. Special Information.
condemn and dispose at the level indicated in
position 3.
The following publications pertain to the Laser Range
O Reparable item.
When uneconomically
Finder AN/VVG-1.
reparable,
condemn
and
dispose
at
organizational level.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals