BALLISTICS DRIVE REMOVAL (CONT) - TM-9-1220-220-340066

TM 9-1220-220-34

4-4.

BALLISTICS DRIVE REMOVAL (CONT)

FRAME 7

Step

Procedure

Using 9/16" box end wrench, remove two screws (1), two lockwashers(2), and flat

washers (3) holding temperature compensating rod (4) to turret pad.

Using 3/4" open wrench, loosen two screws (5) and remove wire seal (6) from adjuster

(7).

Exercise care when removing bracket (9) to prevent damage to pins (10).

Using pry bar, pry bracket (9) from turret pad while rotating adjuster (7)using 1-1/16"

open wrench counter clockwise to free bracket (9) from turret pad and pins (10).

Rotate adjuster (7) clockwise and remove temperature compensating rod (4).

GO TO FRAME 8

Para 4-4 Cont Vol II

4-12