 |
|||
|
|
|||
|
Page Title:
BALLISTICS DRIVE REMOVAL (CONT) |
|
||
| ||||||||||
|
|
 TM 9-1220-220-34
4-4.
BALLISTICS DRIVE REMOVAL (CONT)
FRAME 6
Step
Procedure
1.
Using 1/2" box end wrench, remove two screws (1) and two lockwashers (2) holding cap (3)
to left support (4).
2.
Repairman A: hold trunnion link (5). Repairman B: using 1/2" box end wrench, remove two
screws (6) and two lockwashers (7) holding cap (8) to left support (4).
3.
Repairman B: remove spacers (9 and 10) from spindle (11).
4.
Remove spindle (11) from left support (4).
5.
Place spacers (9 and 10) on spindle and retain spindle and spacers.
6.
Repairman B: using 15/16" box end wrench, remove nut (12) and lockwasher (13) holding
trunnion link (5) to trunnion arm (14).
7.
Repairman A: remove trunnion link (5) by tapping with hammer.
8.
Replace two caps (3 and 8) four lockwashers (2 and 7) and four screws (1 and 6) and hand
tighten to prevent loss.
9.
Replace lockwasher (13) and nut (12) to trunnion link (5) and hand tighten to prevent loss.
GO TO FRAME 7
4-10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals