FINAL INSPECTION REQUIREMENTS

Seq.

No.

Item and Procedure

No.

Item and Procedure

Check flight controls for freedom of movement (no

P.5

P.13

Navigation lights (left, aft, and right) for proper operation.

binding) No. 1 PTU, No. 2 PTU, and both No. 1 and No.

P.14

Formation lights for proper operation (5 places).

2 HYD ON.

P.15

Anticollision lights (upper and lower) for proper operation.

P.6

Perform cargo hook and winch operational check.

P.16

Battery charger maintenance lights in left electrical pod.

P.7

Verify fuel quantity.

CHARGE COMPLETE light should be on.

P.8

Cabin dome lights (4 places) and ramp light for operation

FINAL INSPECTION REQUIREMENTS

and cracked or broken lenses.

F.1

Ensure that all entries on forms, records, and worksheets

P.9

Overhead panel and center console lights for proper

have been completed and updated. Initiate new forms as

operation.

required. Configure aircraft for mission requirements.

P.10

Instrument lights on pilot's, copilot's, and center

F.2

Install protective covers and blade tiedowns as required.

instrument panel for proper operation.

Cockpit flood lights, dome lights, and utility lights for

F.3

Cabin and cockpit areas for loose equipment and

P.11

cleanliness.

proper operation.

Battery and battery charger disconnected as required.

F.4

P.12

Landing lights for proper operation.

"FOD REMINDER"

CHECK WORK AREA FOR TOOLS AND PARTS AFTER COMPLETION OF MAINTENANCE AND INSPECTION.

TM 55-1520-240-PMD

26 Change 1