Maintenance Code - TM-5-6675-329-13-P0074

TM 5-6675-329-13 & P

CODE

DEFINITION

Item to be manufactured or fabricated at the depot support maintenance level.

Item to be assembled at organizational level.

Item to be assembled at the direct support maintenance level.

Item to be assembled at the general support maintenance level.

Item to be assembled at the depot maintenance level.

Item is not procured or stocked because the requirements for the item will result in the replacement of

the next higher assembly.

Item is not procured or stocked. If not available through salvage, requisition.

Installation drawing, diagram, instruction sheet, field service drawing, that is identified by manufacturer's

part number.

A support item that is not stocked.

When required, item will be procured through normal supply

channels.

NOTE

Cannibalization or salvage may be used as a source of supply for any items

source coded above except those coded XA.

(2)

Maintenance Code. Maintenance codes are assigned to indicate the levels of maintenance authorized

to USE and REPAIR support items. The maintenance codes are entered in the third and fourth positions of the Uniform

SMR Code format as follows:

(a) The maintenance code entered in the third position will indicate the lowest maintenance level

authorized to remove, replace and use the support item. The maintenance code entered in the third position will indicate

one of the following levels of maintenance.

CODE

DEFINITION

Crew or operator maintenance performed within organizational maintenance.

F-3