|
|
TM 5-6640-214-14
Figure 4-13. AC Volt Scale (TS-352B/U)
(c) Simpson 160 (fig. 4-14).
1. Put black lead in "COM-" jack.
2. Put red lead in "+" jack.
3. Set selector switch to "V/AC 250" position.
(2) To measure 115 ac voltage, do the following steps:
(a) Set up multimeter (fig. 4-15).
(b) With all three multimeters, connect one probe to one side of the circuit and the other probe to the
other side. The example (fig. 4-15) shows 115 volts ac being measured across an ac light circuit.
(c) Read meter on the "ac" scale. Figure 4-16 shows a reading of 115 volts on all meters.
4-17
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |