ICE MAKER EJECTOR MOTOR RUNS, BUT THE EJECTOR BLADES DO NOT TURN

TM 5-6640-213-14

Table 4-2. Ice Maker Troubleshooting - Continued

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

36. WATER DRIPS OR RUNS SLOWLY INTO ICEMAKER MOLD OR A

RESTRICTION IN THE SOLENOID VALVE PREVENTS WATER FROM

ENTERING THE ICE MAKER MOLD.

Solenoid valve is defective.

Replace valve.

37. ICE MAKER EJECTOR MOTOR RUNS, BUT THE EJECTOR BLADES DO

NOT TURN.

Coupling is broken.

Replace coupling.

38.

THE ICE MAKER EJECTOR MOTOR AND EJECTOR MOTOR BLADES

TURN CONTINUOUSLY WHILE THE DOOR IS CLOSED.

Step 1.

Check for defective temperature control.

Replace control (para. 4-5e.).

Step2. Check for defective holding switch.

Replace switch (para. 4-5c.).

4-20