|
|
TM 5-6640-213-14
(b) Operating Instructions. Operate as follows:
1. Using 3/8-in. plastic or rubber tubing,
connect the inlet hose nipple, at the bottom of the organic removal
cartridge to the water supply. Connect the outlet hose nipple at the
top of mixed resin cartridge to a suitable water container.
2. The basic limiting factor on flow rate is
pressure (25 psig (1.76 kg/sq cm) design). The normal optimum flow
rate is 10 gph. The direction of flow of the water through the
cartridge must be from the bottom upward.
3. Water or other solutions purified by ion
exchange resins are not necessarily free from odor, color or taste,
which may make them unsuitable for some purposes. In some instances
color, taste, or odor may be introduced to the finished product by
trace quantities of either free amines or low molecular weight poly-
mers which are present in the fresh, untreated resin. Generally,
the amine odor will lessen or disappear after passage of a few
gallons of water through the cartridge.
(15) Aneroid Barometer.
(a) Description.
1. The wall-mounted aneroid barometer (29, fig.
and a pressure graduation of 0.10 inch (0.023 cm) of hg. It is 5
inches (12.7 cm) in diameter and has an overall depth of 2.5 inches
(6.35 cm).
2. The basic unit used in the barometer is a
round, thin metal box fitted inside a clamp in the form of a C. The
clamp is called a C-spring. The metal box, or bellows, it sealed
after practically all of the air has been removed. At this point the
bellows would collapse due to the air pressure pushing against it
from the outside. The C-spring keeps the bellows from collapsing
since it holds the sides of the metal box apart and in balance.
Changes in air pressure disturb this point of balance in respect to
the atmosphere, and each slight movement is transmitted to the
barometer pointer which is positioned over a dial graduated in 1/10
inches (0.254 cm) of mercury.
2-38
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |