B-4 COLUMN ENTRIES

TM 5-6350-275-24&P

f. Column 6, Remarks. Column 6 contains an alphabetic code which leads to the remark in Section IV of

Appendix B, which is pertinent to the item opposite the particular code.

B-4 COLUMN ENTRIES. Column entries used in the Tool and Test Equipment Requirements, Section III, are explained

below:

a. Column 1, Tool or Test Equipment Reference Code. The numbers in this column coincide with the code used

in the MAC, Section II, Column 5. The numbers indicate the applicable tool or test equipment for the

maintenance functions.

b. Column 2, Maintenance Level. The lowest level of maintenance authorized to use the tools or test equipment.

c. Column 3, Nomenclature. Name or identification of the tool or test equipment.

d. Column 4, National Stock Number. This column lists the National stock number of the specific tool or test

equipment.

e. Column 5, Tool Number. This column lists the manufacturer's part number of the tool followed by the

Commercial and Government Entity Code (CAGEC) in parentheses.

f. Column 6, Remarks. This column lists additional information or codes that may be required.

B-5 COLUMN ENTRIES. Column entries used in Section IV - Remarks are explained below:

a. Reference Code. This code refers to the appropriate item listed in Section II - Maintenance Allocation Chart,

column 6.

b. Remarks. This column provides the required explanatory information necessary to clarify items appearing in

Section II - Maintenance Allocation Chart.

B-3/(B-4 Blank)