REMOVE AND REPLACE RADIO FREQUENCY LINK

TM 5-6350-275-24&P

3-130. REMOVE AND REPLACE RADIO FREQUENCY LINK.

Due to specialized requirements for the equipment and the unit's accessibility, refer to the SAIG to determine proper

trouble-shooting, removal and replacement procedures.

3-131. STARPIN KEYPAD OPERATION.

a. Perform the following maintenance procedures to self test, walk test, or shunt zone sensors as necessary.

StarPin keypad abbreviations are as follows:

BEL

Bell Test

ACC

Access

AUD

Audible

CLR

Clear

CMD

Command

DIS

Display

EXT

Extended Hours

MTC

Maintenance Mode

PER

Perimeter Sensor

SEC

Secure

SLF

Self Test

SNT

Shunt Sensor

TST

Test Mode

24H

24 Hour Sensor

WLK

Walk Test

ZNE

Zone

b. The Stargate alarm zone keypads operate as access/secure initiating devices for their specific alarm zones of the

Stargate remote. In addition, you can use the keypad to review the status of the sensors within the zone, extend the

normal working hours of the zone, and initiate duress codes and sensor tests. The following figure illustrates the

keypad layout and the LCD readout.

Figure 3-73. Starpin Keypad

3-238