REPLACE 12 V BATTERY

TM 5-6350-275-24&P

3-107. REPLACE 12 V BATTERY. (Figure 3-55).

This task consists of:

a. Remove

b. Install

INITIAL SETUP:

Materials/Parts:

General Safety Instructions:

12 v battery, 4 AH (2ea)

Remove all jewelry while working on

equipment.

WARNING

Shut off power source before attempting to disconnect, service, or connect wires or

cables. Failure to do so may result in serious injury or death.

a. Removal

(1) Open and remove front access cover from IAC enclosure.

(2) Remove AC adapter (3) from power receptacle (4).

(3) Remove red and black slip on terminal lugs from positive and negative terminals of 12 v battery or batteries (5).

(4) Remove battery or batteries from enclosure.

b. Installation

(1) Place 12 v battery or batteries (5) into enclosure.

(2) Connect red and black slip on terminal lugs to positive and negative terminals of 12 v battery or batteries (5).

(3) Connect AC adapter (3) to power receptacle (4).

(4) Place front access cover on IAC enclosure and secure.

3-202