REPLACE CLOSED CIRCUIT TV CAMERA 2/3 IN. (EXTERIOR)

TM 5-6350-275-24&P

3-97. REPLACE CLOSED CIRCUIT TV CAMERA 2/3 IN. (EXTERIOR). (Figure 3-49).

This task consists of:

a. Remove

b. Install

INITIAL SETUP:

Tools:

General Safety Instructions:

Open End Wrench Set (Item 13, App B)

Remove all jewelry while working on

equipment.

Materials/Parts:

CCTV Camera 2/3" (Exterior)

WARNING

Shut off power source before attempting to disconnect, service, or connect wires or cables.

Failure to do so may result in serious injury or death.

a. Removal

(1) Unplug ac power cord (5) from power source.

(2) Remove coaxial cable(s) from Sync In connector (3) and Video output connector (4).

(3) Remove 1/4 in. bolt (2) and mounting hardware from top or bottom of camera housing and mounting bracket.

Remove camera (1) from mounting bracket.

b. Installation

(1) Place camera onto mounting bracket and remount using 1/4 in. bolt and mounting hardware.

(2) Connect coaxial cable(s) to Sync In connector (3) and Video output connector (4).

(3) Connect ac power cord (5) to power source.

3-188