REPLACE CLOSED CIRCUIT TV MONITOR

TM 5-6350-275-24&P

3-95.

REPLACE CLOSED CIRCUIT TV MONITOR. (See Figure 3-48).

This task consists of:

a. Remove

b. Install

INITIAL SETUP

General Safety Instructions:

Materials/Parts:

Remove all jewelry while working on

CCTV Monitor

equipment.

Wear ESD wriststrap while working on

equipment.

WARNING

Shut off power source before attempting to disconnect, service, or connect wires or cables.

Failure to do so may result in serious injury or death.

a. Removal

(1) Press power on/off switch (1) to remove power to monitor (2).

(2) Disconnect input ac power cord (4) from terminal power source.

(3) Tag and remove video in and video out coaxial cables (3) from rear of TV monitor (2).

(4) Remove monitor from CCTV console (5).

b. Installation

(1) Place monitor (2) on CCTV console (5).

(2) Connect tagged coaxial cable to video input and video output jacks (3).

(3) Connect ac input power cord (4) to terminal strip.

(4) Press power on/off switch (1) to apply power to monitor. Power on/off lamp should illuminate.

3-185