REPLACE 12 VDC BATTERY - TM-5-6350-275-24-P0244

TM 5-6350-275-24&P

3-79.

REPLACE 12 VDC BATTERY. (See Figure 3-43).

This task consists of:

a. Remove

b. Install

INITIAL SETUP

Equipment Condition:

General Safety Instructions:

Input power removed

Remove all jewelry while working on

Enclosure access cover removed

equipment.

Materials/Parts:

Wear ESD wriststrap while working on

12 VDC battery

equipment.

WARNING

Shut off power source before attempting to disconnect, service, or connect wires or cables.

Failure to do so may result in serious injury or death.

a. Removal

(1) Remove the two slip-on terminals from Battery (27) positive and negative terminals.

(2) Remove Battery (27) from enclosure.

b. Installation

(1) Place Battery (27) in bottom of enclosure.

(2) Connect the two slip-on terminals to Battery (27) positive and negative terminals.

(3) Reconnect input power.

(4) Replace enclosure cover and secure.

3-164