REPLACE 12 VDC, 12 POINTS, INTERIOR SUB-RADC (LEDA)

TM 5-6350-275-24&P

3-70. REPLACE 12 VDC, 12 POINTS, INTERIOR SUB-RADC (LEDA). (See Figure 3-42).

This task consists of:

a. Remove

b. Install

INITIAL SETUP

Equipment Condition:

General Safety Instructions:

Input power removed

Remove all jewelry while working on equipment.

Enclosure access cover removed

Wear ESD wriststrap while working on equipment

Tools:

Screwdriver, flat tip, (Item 6, App B)

Screwdriver, flat tip, (Item 7, App B)

Materials/Parts:

12 point Sub-RADC (Leda) Assembly

WARNING

Shut off power source before attempting to disconnect, service, or connect wires

or cables. Failure to do so may result in serious injury or death.

a. Removal

(1) Remove slip on terminal strip from TB-7 (3).

(2) Remove slip on terminal strips (12), (11) and (10) from Leda Flex termination PWA (1).

(3) Using a flat tip screwdriver, remove the five screws (9) holding the Leda Panel Assembly (13) to enclosure

and remove the Leda Panel Assembly (13).

b. Installation

(1) Align the Leda Panel Assembly (13) mounting holes up with the enclosure standoffs and secure with five

screws (9).

(2) Reconnect slip on terminal strip to Leda Flex PWA TB-7 (3).

(3) Connect the slip on terminal strips (12), (11) AND (10) to Leda Flex termination PWA.

(4) Replace enclosure cover and secure.

3-154