REPLACE 12 VDC BATTERY - TM-5-6350-275-24-P0230

TM 5-6350-275-24&P

3-67. REPLACE 12 VDC BATTERY. (See Figure 3-41).

This task consists of:

a. Remove

b. Install

INITIAL SETUP

Equipment Condition:

General Safety Instructions:

Input power removed

Remove all jewelry while working on equipment.

Enclosure access cover removed

Materials/Parts:

Wear ESD wriststrap while working on equipment.

12 vdc battery

WARNING

Shut off power source before attempting to disconnect, service, or connect wires

or cables. Failure to do so may result in serious injury or death.

a. Removal

(1) Remove the two slip-on terminals from Battery (12) positive and negative terminals.

(2) Remove Battery (12) in bottom of enclosure.

b. Installation

(1) Place Battery (12) in bottom of enclosure.

(2) Connect the two slip-on terminals to Battery (12) positive and negative terminals.

(3) Reconnect input power.

(4) Replace enclosure cover and secure.

3-150