REPLACE 18 VAC ADAPTER.(Exterior)

TM 5-6350-275-24&P

3-53. REPLACE 18 VAC ADAPTER.(Exterior) (Figure 3-39 and FO-6, sheet 1).

This task consists of:

a. Remove

b. Install

INITIAL SETUP

Tools:

Equipment Condition:

Screwdriver, Flat tip (Item 6, App B)

AC adapter disconnected

Wire Cutters (Item 24, App B)

General Safety Instructions:

Materials/Parts:

Remove all jewelry while working on

18 vac adapter

equipment.

WARNING

Shut off power source before attempting to disconnect, service, or connect wires

or cables. Failure to do so may result in serious injury or death.

a. Removal

(1) Open and remove front access cover from NEMA 4 enclosure.

(2) Remove ac adapter (12) from ac outlet power receptacle (7).

(3) Disconnect adapter wires from Stargate 1000 PWA (10) TB1 pins 1 and 2.

(4) Remove ac adapter (12) from RADC enclosure.

b. Installation

(1) Place ac adapter (12) in RADC enclosure.

(2) Connect ac adapter two input wires to Stargate 1000 PWA (10) TB1 pins 1 and 2.

(3) Plug in ac adapter (12) to ac outlet power receptacle (7).

(4) Place front access cover on NEMA 4 enclosure and secure it.

3-133