REPLACE TAMPER SWITCH.(Interior)

TM 5-6350-275-24&P

3-45. REPLACE TAMPER SWITCH.(Interior) (see Figure 3-38).

This task consists of:

a. Remove

b. Install

INITIAL SETUP:

Tools:

General Safety Instructions:

Screwdriver, Flat tip (Item 6, App B)

Remove all jewelry while working on

equipment.

Equipment Condition:

Input power removed

Wear ESD wriststrap while handling electronic

Enclosure access cover removed

assemblies.

Materials/Parts:

Tamper switch

WARNING

Shut off power source before attempting to disconnect, service, or connect wires or cables. Failure to do

so may result in serious injury or death.

a. Replace

(1)

Tag and remove the two slip-on connectors (31) from Tamper Switch (30), by holding and pulling out on

connectors.

(2)

Using a flat tip screwdriver, remove the two screws (33) and flat washers (32) holding Tamper Switch (30) to

enclosure.

(3)

Remove Tamper Switch from enclosure.

a. Installation

(1)

Align Tamper Switch up with enclosure mount (13) and secure with two screws (33) and flat washers (32).

(2)

Connect the tagged slip on connectors (31) to Tamper Switch (30).

(3)

Connect AC adapter to power source.

(4)

Replace enclosure cover and secure.

3-124