REPLACE VIDEO GRAPHICS ADAPTER

TM 5-6350-275-24&P

3-21. REPLACE VIDEO GRAPHICS ADAPTER. (Figure 3-31)

This task consists of:

a. Remove

b. Install

INITIAL SETUP:

Equipment Condition:

General Safety Instructions:

Color monitor power off

Remove all jewelry while working on

Materials/Parts:

equipment.

Video Graphics Adaptor

WARNING

Shut off power source before attempting to disconnect, service, or connect wires or cables. Failure to do

so may result in serious injury or death.

Removal

(1) Remove keyboard cable (7) from VGA adapter (9).

(2) Loosen the two captive screws on video graphics cable (10) and color monitor video cable (5) and remove from

cables from VGA adapter (9).

Installation

(1) Connect and secure video graphics cable (10) and color monitor video cable (5) to VGA adapter (9) with the two

captive screws on each cable.

(2) Connect keyboard cable (7) to VGA adapter (9) by inserting connector into VGA adapter jack until cable

connector locks into place.

3-22. REPLACE POWER MODULE.(Refer to paragraph 3-13 and Figure 3-28.)

3-93