Table 2-1. Unit Preventive Maintenance Checks and Services for the ICIDS

TM 5-6350-275-24&P

Table 2-1. Unit Preventive Maintenance Checks and Services for the ICIDS

Item

Interval

Location: Item to

Procedures

No.

Check/Service

Semi-Annual

CCTV Cameras and

Check for loose cable connections, damage or frayed cables,

Housings

(Interior

missing hardware, and visible damage to the housing assembly.

and Exterior)

Clean housing assembly as necessary with clean water and dry with

clean wiping rags (Appendix D, Item 12). Clear camera lens field of

view as necessary. Check air pressure for all pressurized camera

housing.

Semi-Annual

CCTV

Camera

Check for loose or missing hardware and any visible damage to the

supports

camera support. Check hinge pins (if applicable) for rust. Clean and

apply lubricant as required to cantilever support, etc. (Appendix D,

Item 11).

Semi-Annual

Sensors

(outdoor,

Check for loose or missing hardware on mounting brackets, and any

pole

mounted,

visible damage to transceiver assembly. Check mounting hardware

transmitter/ receiver

for rust; clean and lubricate hinge points as necessary (Appendix D,

units

Item 11). Check for loose cable connections and frayed cables.

Remove snow, ice, dirt, and other matter as necessary.

Semi-Annual

Sensors

(outdoor,

Check for loose or missing hardware on mounting brackets, and any

fence mounted)

visible damage to processor assembly or sensors. Check for loose

cable connections, frayed or cut cables. Remove any debris from

fence or fence line.

Semi-Annual

Uninterruptible Power

Clean the UPS unit with a damp cloth and dry with clean wiping rags

Supply (UPS)

(Appendix D, Iteml2). (See paragraph 2-12.)

Semi-Annual

Tape

Streamer

Clean tape head using head cleaning kit (Appendix D, Item 2). (See

Module

paragraph 2-10.)

Annual

Floppy Diskette Drive

Clean using disk cleaning kit (Appendix D, Item 1). (See paragraph

2-11.)

2-4